The C-TOP B control unit can adapt to any INOXPA actuator and both efficiently and individually automate pneumatically driven process valves.
These include butterfly, ball or single or double seat valves with single-acting actuator.
C-TOP B وحدة تحكم
طلب معلومات
C-TOP B وحدة تحكم
مبادئ التشغيل
The control head works with or without a solenoid valve. It contains two magnetic targets fixed to the adapter shaft and an electronic module formed by three sensors connected to the three visual indicators (LEDs).
Through external signals, the solenoid valve which controls and acts on the valve is activated.
At the same time, the electronic module sensors can read the position of the valve actuator through the detection of the position of the targets located on the adapter shaft and they inform of the valve state with the illuminate of the control head.
The control head includes DIP switches that allow obtaining different configurations of the output signals to adapt the control head to the different types of valves.
التصميمو المميزات
The C-TOP B installs easily onto the top of the valve’s actuator.
Quick and simple configuration.
Line detection using magnetic Reed type sensors.
360º vies of lights indicating valve status.
مواد
Plastic parts PA6
Nuts and bolts A2
Gaskets NBR
Pneumatical connections nickel-plated brass
الوثائق
Data sheet (4)
Quick installation guide (2)
Instruction manual (4)
مبادئ التشغيل
The control head works with or without a solenoid valve. It contains two magnetic targets fixed to the adapter shaft and an electronic module formed by three sensors connected to the three visual indicators (LEDs).
Through external signals, the solenoid valve which controls and acts on the valve is activated.
At the same time, the electronic module sensors can read the position of the valve actuator through the detection of the position of the targets located on the adapter shaft and they inform of the valve state with the illuminate of the control head.
The control head includes DIP switches that allow obtaining different configurations of the output signals to adapt the control head to the different types of valves.
مواد and اختيارات
Plastic parts PA6
Nuts and bolts A2
Gaskets NBR
Pneumatical connections nickel-plated brass
الوثائق
| وثيقة رقم | 10.427.33.02ES |
| Title | C-TOP B Cabezal de Control |
| نوع الملف | |
|
|
| وثيقة رقم | 10.427.33.02EN |
| Title | C-TOP B Control Unit |
| نوع الملف | |
|
|
| وثيقة رقم | 10.427.33.02FR |
| Title | C-TOP B Tête de commande |
| نوع الملف | |
|
|
| وثيقة رقم | 10.427.33.02RU |
| Title | C-TOP B Контрольное устройство |
| نوع الملف | |
|
|
| وثيقة رقم | 10.427.30.09MU |
| Title | VALID GUIDE SINCE JANUARY 2024 - Quick installation guide / Guía rápida de instalación / Guide d’installation rapide / Краткое руководство по монтажу C-TOP B |
| نوع الملف | |
|
|
| وثيقة رقم | 10.427.30.05MU |
| Title | VALID GUIDE UNTIL JANUARY 2024 (PCB R - 8V9C0-3311000000) - Quick installation guide / Guía rápida de instalación / Guide d’installation rapide / Краткое руководство по монтажу C-TOP B |
| نوع الملف | |
|
|
| وثيقة رقم | 10.427.30.06ES |
| Title | INSTRUCCIONES DE INSTALACIÓN, SERVICIO Y MANTENIMIENTO - CABEZAL DE CONTROL C-TOP B |
| نوع الملف | |
|
|
| وثيقة رقم | 10.427.30.06EN |
| Title | INSTALLATION, SERVICE AND MAINTENANCE INSTRUCTIONS - CONTROL HEAD C-TOP B |
| نوع الملف | |
|
|
| وثيقة رقم | 10.427.30.06FR |
| Title | INSTRUCTIONS RELATIVES À L’INSTALLATION, À LA MISE EN SERVICE ET À LA MAINTENANCE - TÊTE DE COMMANDE C-TOP B |
| نوع الملف | |
|
|
| وثيقة رقم | 10.427.30.06RU |
| Title | ИНСТРУКЦИИ ПО УСТАНОВКЕ, ЭКСПЛУАТАЦИИ И ОБСЛУЖИВАНИЮ - КОНТРОЛЬНОЕ УСТРОЙСТВО C-TOP B |
| نوع الملف | |
|
|
منتجات متعلقة
