اتصل بنا
C-TOP AS-i Control Unit C-TOP AS-i

C-TOP AS-i Control Unit C-TOP AS-i

طلب معلومات

C-TOP AS-i Control Unit C-TOP AS-i

The C-TOP control unit with the AS-i (Actuator Sensor Interface) communication is designed for automation of valves. This option is available for the valves supplied with C-TOP units (ball valve, butterfly valve, seat valves). 

طلب معلومات

C-TOP AS-i Control Unit C-TOP AS-i

مبادئ التشغيل

The AS-i is a fieldbus system that allows to connect a network of actuators and sensors (detectors) to a control device of a higher level (Master).

Power supply, one or several master modules, bus cable (preformed cable) and the C-TOP prepared for AS-i connection (special internal card, connection cable, AS-i insulation displacement connector) are necessary to create an AS-i network.

The As-i fieldbus is provided with voltage by a power supply source.

The sensors and electrovalves connected to the fieldbus are controlled by the master module.
Every Master sends the information to the PLC and controls up to 62 units (C-TOP's).

The interconnection is made with a preformed cable. The preformed cable is used for transmitting information as well as a power supply of the electrovlaves and detectors. An AS-i version C-TOP must always be installed with inductive detectors and 24V DC.
The preformed cables and bus cables of the C-TOP's are connected by means of insulation displacement connectors, thus, the cables connecting every C-TOP with the control system are not necessary.

التصميمو المميزات

AS-i bus offers an easy, fast and economic interconnection of sensors and electrovalves (actuators). It facilitates the assembly and the start-up of the plant as the cabling is considerably reduced. It also reduces the start-up time as well as it helps to avoid possible installation errors.
The C-TOP units can be set up according to the customer’s requirements.

Configuration of solenoid valves
. Single-acting actuation - 1 solenoid valve
. Double-acting actuation - 2 solenoid valves
. Mixproof valve – 3 solenoid valves*

Configuration of detectors
The valve position is detected by means of inductive detectors.
. 1 position (closed or open valve) - 1 detector
. 2 positions (closed and open valve) - 2 detectors
. 3 positions (open valve, closed valve, Mixproof seat cleaning) - 3 detectors*

*Depending on the model

مواد

Base: PPO + GF
Cover :Transparent PC
Gaskets: EPDM 

اختيارات

External detector (Detection of the seat lift when it cannot be detected inside the C-TOP).
Materials for work under extreme conditions (PSU cover).
Segment with 4 inputs y 4 outputs in AS-i 2.1 (31 slaves).

الوثائق

مبادئ التشغيل

The AS-i is a fieldbus system that allows to connect a network of actuators and sensors (detectors) to a control device of a higher level (Master).

Power supply, one or several master modules, bus cable (preformed cable) and the C-TOP prepared for AS-i connection (special internal card, connection cable, AS-i insulation displacement connector) are necessary to create an AS-i network.

The As-i fieldbus is provided with voltage by a power supply source.

The sensors and electrovalves connected to the fieldbus are controlled by the master module.
Every Master sends the information to the PLC and controls up to 62 units (C-TOP's).

The interconnection is made with a preformed cable. The preformed cable is used for transmitting information as well as a power supply of the electrovlaves and detectors. An AS-i version C-TOP must always be installed with inductive detectors and 24V DC.
The preformed cables and bus cables of the C-TOP's are connected by means of insulation displacement connectors, thus, the cables connecting every C-TOP with the control system are not necessary.

مواد and اختيارات

Base: PPO + GF
Cover :Transparent PC
Gaskets: EPDM 

External detector (Detection of the seat lift when it cannot be detected inside the C-TOP).
Materials for work under extreme conditions (PSU cover).
Segment with 4 inputs y 4 outputs in AS-i 2.1 (31 slaves).

وثيقة رقم FT.C-TOP AS-i bus.3_ES
Title C-TOP con Comunicación AS-i (bus de campo)
نوع الملف .pdf
ملخص El cabezal de control C-TOP con comunicación AS-i (Actuator Sensor Interface) está diseñado o pensado para el caso de automatización de válvulas.
    Download
  • E-mail
وثيقة رقم FT.C-TOP AS-i bus.3_EN
Title C-TOP with AS-i communication (fieldbus)
نوع الملف .pdf
ملخص The C-TOP control unit with the AS-i (Actuator Sensor Interface) communication is designed for automation of valves.
    Download
  • E-mail
وثيقة رقم FT.C-TOP AS-i bus.3_FR
Title C-TOP avec communication AS-i (bus de terrain)
نوع الملف .pdf
ملخص Le boîtier de contrôle C-TOP avec communication AS-i (Vérin Senseur Interface) est conçu dans le cas d'automatisation de vannes.
    Download
  • E-mail
وثيقة رقم FT.C-TOP AS-i bus.3_DE
Title C-TOP mit AS-I Kommunikation (Feldbus)
نوع الملف .pdf
ملخص Das C-TOP-Steuergerät mit der AS-i (Actuator Sensor Interface) Kommunikation ist für die Automatisierung von Ventilen konzipiert
    Download
  • E-mail
وثيقة رقم FT.C-TOP AS-i bus.3_IT
Title C-TOP con comunicazione AS-i (bus di campo)
نوع الملف .pdf
ملخص La testata di controllo C-TOP con comunicazione AS-i (Attuatore Sensore Interfaccia) è stata progettata e pensata in caso di automazione di valvole.
    Download
  • E-mail
وثيقة رقم FT.C-TOP AS-i bus.3_RU.pdf
Title C-TOP с коммуникацией AS-i (промышленная сеть)
نوع الملف .pdf
ملخص Контрольное устройство C-TOP с коммуникацией AS-i предназначено для автоматизации клапанов.
    Download
  • E-mail
وثيقة رقم FT.C-TOP AS-i bus.3_CN
Title C-TOP带AS-i的通信智能控制器 (现场总线)
نوع الملف .pdf
ملخص C-TOP带AS-i的通信智能控制器 (传感器接口) 是专门为气动类阀门提供智能控制反 馈单元 (气动蝶阀、气动球阀、气动单座阀、防混阀等)。
    Download
  • E-mail
وثيقة رقم 10.420.30.00ES_RevB
Title INSTRUCCIONES DE INSTALACIÓN, SERVICIO Y MANTENIMIENTO Cabezal de control C-TOP
نوع الملف .pdf
ملخص El C-TOP es un cabezal de control neumático diseñado para asegurar un control óptimo de las válvulas de proceso de INOXPA.
    Download
  • E-mail
وثيقة رقم 10.420.30.00EN_RevB
Title INSTALLATION, SERVICE AND MAINTENANCE INSTRUCTIONS C-TOP control head
نوع الملف .pdf
ملخص The C-TOP is a pneumatic control head designed to assure the optimum control of INOXPA process valves.
    Download
  • E-mail
وثيقة رقم 10.420.30.00FR_RevB
Title INSTRUCTIONS D'INSTALLATION, SERVICE ET ENTRETIEN Tête de commande C-TOP
نوع الملف .pdf
ملخص La C-TOP est une tête de commande pneumatique conçue pour assurer un contrôle optimum des robinets de INOXPA.
    Download
  • E-mail
وثيقة رقم 10.420.30.00IT_RevB
Title ISTRUZIONI DI INSTALLAZIONE, SERVIZIO E MANUTENZIONE Testata di controllo C-TOP
نوع الملف .pdf
ملخص C-TOP è una testata di controllo pneumatica progettata per garantire un controllo ottimale delle valvole di processo di INOXPA.
    Download
  • E-mail